C24L2
Carbon Series 24 inch Subwoofer
The Carbon Series is the result of over 6 years of design and development with the express purpose of being the best subwoofer aimed squarely at the customer that wants every last scrap of bass that they paid for, and they want it all to be clean.
All Harbottle products are made to order and assembled by hand under strict quality control measures.
Design Notes:
- The carbon fibre is a key component to reducing the ill effects of resonance and as such it offers distinct advantages in driver behaviour, amp programming, and increases clarity of sound.
- This sonic profile of the Carbon Series is that of deep rich bass that sound solid with effortless weight behind it.
- The LDLC engineering model removes the effects of coloration of the sound, which draws focus on what the sound engineer did in the mix to create the sonic profile of the content you are listening to.
Shipping included within continental North America.
International shipping is prorated to consider the included North American shipping.
How to compare subwoofers to inclusive distoriton and compression, click here.
L2 Information
Weights and Measures- 900 mm H x 722 mm W x 512 mm D
- 35.43" H x 28.43" W x 20.16" mm D
- Standing weight: 68 kg/150 lb
- Shipping weight: 77 kg/175 lb
Amplifier- 4.4 kW
- Dual XLR inputs
- USB interface to PC
- Automatic Dual voltage 115/230V
DSP Features- Parametric EQ, 5 filter types, 10 bands/ch
- High and low pass crossover, 10 slope options
- Adjustable Delay
- Adjustable level
- Adjustable limiting
- Auto on/off
- Front mounted display/controls
Physical features- One piece aluminum Chassis/heat sink
- Passive cooling
- Black anodized finish
- 20 Amp rated mains input, power cord, circuit breaker/power switch
- 10 foot heavy gauge detachable power cord
- Hand made by Harbottle
Output Power- 4400 watts RMS
- 10400 watts peak
- 120Db dynamic range
Driver- 24 inch
- Hand made by Harbottle
- Underhung motor design for the ultimate linearity
- 5” Aluminum voice coil
- High energy 9″ diameter Neodymium magnet structure
- Full length Aluminum shorting ring for reduced distortion
- Linear Inductance +/-5% through 3 p-p travel resulting in very low distortion, and clean bass.
- Cast Aluminum frame
- Anodized aluminum dust cap
- Four layer 100% carbon fiber cone
- Treated foam surround
- 80 mm P-P excursion
- Under spider venting
- Assembled with high temperature epoxies
Performance
CEA 2010 at 2 m:Hz
10
12.5
16
20
25
32
40
50
63
80
100L1
94
99
106
114
116
121
121.1
121.6
121.6
121
121L2
99
103
110
117
120.7
124
126.3
127.3
126.7
126
125Output numbers are conservative.Shipping Information
Shipping is handled by freight.
Once the item has left the Harbottle facility, Harbottle does not have control or influence over the arrival date of the item.
All shipping information is shared with the client and as such, the client has as much information as Harbottle at any given time about the location of the product.
Upon exchange of possession from the freight handler to the purchaser, the crate must be inspected for damage and defect. If the crate has obvious damage that is suspect of associated damage to the item, the item must be refused and damage must be cited as the reason for refusal.
Non-obvious damage or performance issues must be reported within 48 hours of delivery, otherwise warranty may be void.
Quality Control and Assurances
All Harbottle product is tested and verified over 500 times throughout the build process. As such, all Harbottle product is certified as ready for use upon packaging and shipping. Defective equipment is not permitted to leave our factory.
If your item is found defective upon arrival, contact Harbottle immediately.
